And then it turns out that is more convenient to use and more functional than the usual soldering iron, and one of the low-end soldering stations. Their device allows to solder a variety of objects with proper regulation. Soldering stations are good especially its ergonomics and handling. No soldering done qualitatively stable operation of electronic devices (and the contact in the chandelier, and mikrodetaley inside the computer) for sure will eventually be broken. The physical nature of the process propaivaniya promotes good and lasting connection: when soldering a mutual dissolution of the solder and the metal part to which it is applied. The result – when the metal cools down – turns out quite a strong connection, which has good electrical conductivity, which reduces the heat at times. There is, however, a number of nuances that should be taken into account in order to connect always get high quality and served for a long time. Speaking of the solders and soldering stations, we must remember, what characteristics are crucial for these devices. The main difference between soldering stations – a power which they can apply for a soldering tip. If the assembly of small elements that are sensitive to static electricity requires the use of Soldering with a capacity of 20-40 W, for a competent propaivaniya guides, rails and all the elements of massive iron stations should provide 40-100 Tues Soldering irons and soldering stations with capacity of 100 watts in the main are currently used for reliable soldering large metal items, especially if the object you are working with soldering station consists of non-ferrous metals with high thermal conductivity (copper, brass, for example).